To enhance indoor air quality, get rid of moisture, and prevent mould from growing, the Positive Input Ventilation (PIV) is the best option. If you’re a complete beginner and just need a no-nonsense PIV system installation guide, this is what you require. This step-by-step guide will walk you through the process of installing a PIV system. In this way, you can turn this project into a DIY or you may leave it to a specialist if you prefer.
Through this PIV installation guide, you will not only know the advantages and tools of a PIV system but also how to properly do it. Let’s get started!
Why You Should Install a PIV System
A PIV system functions by priming the indoor air with fresh, filtered air which replaces the stale and moist air of your home. This means that places that are humid or are without adequate airflow can particularly benefit from this equipment. By keeping the airflow constant, a PIV system gets rid of problems like mould, moisture, as well as bad air quality. The circulating air helps to keep the humidity levels down, stop condensation, and maintain a healthy indoor climate.
Have a look at some significant reasons to PIV install now:
- No Damp and Mould Bearing: PIV systems are of much help in reducing extra moisture that may cause mildew
- Better Indoor Air Quality: A continuous inflow of fresh air displaces stale air plus brings fine fresh air into the house.
- Cost-Efficient: A properly installed PIV system is a low-cost fix for the ventilation of a building without any significant alterations.
The awareness of the key advantages which you can have the ability to enjoy when you decide to install a PIV system will be a great guarantee that your decision about your home will be fair.
The Step-by-Step PIV Installation Process
Image belongs to Theme photos
The PIV system setup is a daunting task at first, but with the right PIV installation guide, it can be completed. Here’s a breakdown of the installation steps:
1.Pick the Ideal Location for the Unit
Before you begin, choose the place in the loft or attic where the PIV unit can be mounted securely. This area should be right beside one of the power components to ensure the normal flow of electricity; otherwise, the unit will not work properly.
2.Gather Your Tools and Materials
Apart from the general tools, you’ll also need a drill, screws, a screwdriver, and a ladder to assemble the PIV system. Don’t forget to purchase a PIV kit, some processors, along with electrical components if they are necessary from the salesperson.
3.Install the PIV Unit
With the help of the PIV installation guide, place the PIV unit in the designated area. The majority of the units are either ceiling or wall mounts in the loft, and that differs according to the model. Be sure the unit is properly fixed and is prepared to be connected to the ductwork.
4.Connect the Ducting
Once it is in its place, the next step is to connect the duct from the PIV system to a central point in your home, which is usually a hallway or the living room. All ducts must be air-sealed to stop duct leakages.
5.Wire the System to Power
In the next step, you will have to connect the PIV system to the home’s electrical supply line. This is the time to be extra careful and call a professional in case you are not sure about the electrical connections.
6.Test the System
After you completed the physical setup, you need to check that the system is working well. You should feel at least some of the air moving out of the vent, and the unit should make only a little noise. If you still have any issues, examine the connections and airflow.
Frequently Asked Questions (FAQ)
What is a PIV system?
A Positive Input Ventilation system is designed to bring fresh air inside your home, thus improving the quality of air and reducing moisture condensation.
Can I install a PIV system myself?
Yes, identifying the appropriate tools and possession of the necessary knowledge are important for a DIY project; However, it would be safer to have a professional check the electrical connections.
Where should I install the PIV unit?
Yet, most often than not, a PIV unit is mounted in the attic or loft as it is the main location where a PIV unit can be used to blow all the air around the house.
What tools are needed for PIV installation?
You have to take screws, a drill, a screwdriver, a ladder, a ducting and if required an electrical connection kit for the task.
How long does it take to install a PIV system?
As a rule of thumb, the PIV system setup will span from 4 to 8 hours depending on the complexity of the installation.
How do I know if my home needs a PIV system?
If your house is prone to condensation, features have turned black due to dampness, and the air is stale, the PIV unit is a proven remedy for everybody.
How often should I maintain my PIV system?
Every 6-12 months, which includes cleaning the filters and the ducts, is the proper maintenance schedule that is to be performed on a regular basis to ensure all the things are in good working condition.
Ready to Improve Your Home’s Air Quality?
If you’re ready to take the next step and install a PIV system in your home, don’t hesitate to reach out to us at PIV-UK. Our team of experts is ready to help guide you through the process, ensuring your home stays fresh and healthy. For more details on PIV installation, or to get a personalised quote, contact us today!
